Skip to Content
Products
Resources
Dealers
Shop
AtoVproject
(0)
Cart (0)
Products
Resources
Dealers
Shop
AtoVproject
(0)
Cart (0)
Products
Resources
Dealers
Shop
Shop AtoVproject - cDVCA DIY
PXL_20220810_075700519~3.jpg Image 1 of 7
PXL_20220810_075700519~3.jpg
PXL_20220810_075816649~2.jpg Image 2 of 7
PXL_20220810_075816649~2.jpg
2 Module white BG.jpg Image 3 of 7
2 Module white BG.jpg
cDVCA black white BG.jpg Image 4 of 7
cDVCA black white BG.jpg
prespective Black.jpg Image 5 of 7
prespective Black.jpg
cDVCA Silver white BG.jpg Image 6 of 7
cDVCA Silver white BG.jpg
prespective Silver.jpg Image 7 of 7
prespective Silver.jpg
PXL_20220810_075700519~3.jpg
PXL_20220810_075816649~2.jpg
2 Module white BG.jpg
cDVCA black white BG.jpg
prespective Black.jpg
cDVCA Silver white BG.jpg
prespective Silver.jpg

AtoVproject - cDVCA DIY

€190.00

cDVCA or class-D VCA is a new kind of VCA based on an entirely novel concept that is inspired from class-D amplification technology. This is not a transparent VCA and brings a lot of character to the sound.

The first VCA that tracks 1V/oct

Concept: The input signal is turned into an ultrasonic PWM signal (~34kHz). The PWM is scaled to the desired amplitude and then filtered back down to the original signal.

The twist: The PWM frequency can be lowered down into the audio spectrum and the frequency can be controlled via its 1V/oct input allowing for crazy waveshaping that tracks your melodies.

The drive controls an innovative clipping method that does not rely on overdriving any circuitry and therefore results in distortions with a very defined character.

The signal then goes into a 1 pole VCF/tone circuit that allows to keep things under some amount of control as the harmonics produced by this module can be very aggressive.

With no input the module generates a simple square wave and therefore can be used a simple synth voice (VCO->VCA-VCF)

Color:
Quantity:
Add To Cart

cDVCA or class-D VCA is a new kind of VCA based on an entirely novel concept that is inspired from class-D amplification technology. This is not a transparent VCA and brings a lot of character to the sound.

The first VCA that tracks 1V/oct

Concept: The input signal is turned into an ultrasonic PWM signal (~34kHz). The PWM is scaled to the desired amplitude and then filtered back down to the original signal.

The twist: The PWM frequency can be lowered down into the audio spectrum and the frequency can be controlled via its 1V/oct input allowing for crazy waveshaping that tracks your melodies.

The drive controls an innovative clipping method that does not rely on overdriving any circuitry and therefore results in distortions with a very defined character.

The signal then goes into a 1 pole VCF/tone circuit that allows to keep things under some amount of control as the harmonics produced by this module can be very aggressive.

With no input the module generates a simple square wave and therefore can be used a simple synth voice (VCO->VCA-VCF)

cDVCA or class-D VCA is a new kind of VCA based on an entirely novel concept that is inspired from class-D amplification technology. This is not a transparent VCA and brings a lot of character to the sound.

The first VCA that tracks 1V/oct

Concept: The input signal is turned into an ultrasonic PWM signal (~34kHz). The PWM is scaled to the desired amplitude and then filtered back down to the original signal.

The twist: The PWM frequency can be lowered down into the audio spectrum and the frequency can be controlled via its 1V/oct input allowing for crazy waveshaping that tracks your melodies.

The drive controls an innovative clipping method that does not rely on overdriving any circuitry and therefore results in distortions with a very defined character.

The signal then goes into a 1 pole VCF/tone circuit that allows to keep things under some amount of control as the harmonics produced by this module can be very aggressive.

With no input the module generates a simple square wave and therefore can be used a simple synth voice (VCO->VCA-VCF)

Specifications

  • 1 analog triangle oscillator

  • Innovative distortion circuit

  • One pole filter

  • Power consumption:

    • +5V : 0mA

    • +12V : 40 mA

    • -12V : 40 mA

You Might Also Like

AtoVproject - lx-euclid DIY kit 2small.jpg 3small.jpg 4small.jpg 4square.jpg 5small.jpg lx-euclid perpective.JPG
AtoVproject - lx-euclid DIY kit
€250.00
AtoVproject - lx-euclid Assembled lx-euclid perpective.JPG 2small.jpg 5small.jpg 4square.jpg 4small.jpg 3small.jpg
AtoVproject - lx-euclid Assembled
€350.00
AtoVproject - Gaeto DIY kit Black square WBG.jpg Both WBG.jpg Black back WBG.jpg
AtoVproject - Gaeto DIY kit
€90.00
AtoVproject - cLFO DIY cLFO 2 modules white BG.jpg cLFO black white BG.jpg DSC02620+small_cLFO+copy.jpg DSC02637+small_cLFO+copy.jpg
AtoVproject - cLFO DIY
€190.00
AtoVproject - MMx2 DIY MMx2 Perspective Black.jpg MMx2 silver white BG.jpg MMx2 2 modules white BG.jpg MMx2 Perspective Silver.jpg MMx2 black white BG.jpg DSC02654 small.png
AtoVproject - MMx2 DIY
€160.00

Contact us at: info@atovproject.de

Technical support: Support@atovproject.de

Firmware updates: Updates

Berlin - Germany

About

Privacy Policy