Skip to Content
Products
Resources
Dealers
Shop
AtoVproject
(0)
Cart (0)
Products
Resources
Dealers
Shop
AtoVproject
(0)
Cart (0)
Products
Resources
Dealers
Shop
Shop AtoVproject - Gaeto DIY kit
Grey square WBG.jpg Image 1 of 4
Grey square WBG.jpg
Black square WBG.jpg Image 2 of 4
Black square WBG.jpg
Both WBG.jpg Image 3 of 4
Both WBG.jpg
Black back WBG.jpg Image 4 of 4
Black back WBG.jpg
Grey square WBG.jpg
Black square WBG.jpg
Both WBG.jpg
Black back WBG.jpg

AtoVproject - Gaeto DIY kit

€90.00

The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.

Some of the functions that the module can perform are:

  • /2 /3 Clock divider

  • Legato generator

  • Trigger to gate converter

  • Rhythm quantizer

  • Sub octave generator with PWM

  • Generative trigger sequence 

The Gaeto’s function is to perform the following operation:

“If the signal on the data input has been high, then the output is high at the next clock. If not - the non-output is high.”

In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored. 

The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations.

This rather obscure function allows for an extremely wide range of uses. This is a module that rewards exploration.

Additionally, multiple Gaetos can be chained together using the included cable to create shift register functions. 

This design relies on CMOS CD4000 series ICs (4013 and 4081). These were selected for their reliability, high speed and low power consumption.

Color:
Quantity:
Add To Cart

The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.

Some of the functions that the module can perform are:

  • /2 /3 Clock divider

  • Legato generator

  • Trigger to gate converter

  • Rhythm quantizer

  • Sub octave generator with PWM

  • Generative trigger sequence 

The Gaeto’s function is to perform the following operation:

“If the signal on the data input has been high, then the output is high at the next clock. If not - the non-output is high.”

In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored. 

The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations.

This rather obscure function allows for an extremely wide range of uses. This is a module that rewards exploration.

Additionally, multiple Gaetos can be chained together using the included cable to create shift register functions. 

This design relies on CMOS CD4000 series ICs (4013 and 4081). These were selected for their reliability, high speed and low power consumption.

The AtoVproject Gaeto is a new type of clocked logic module. Gaeto is a great module to play around with triggers, gates and legatoes turning one into the other. As a result we decided to name the module Gaeto from “Gate” and “Legato”.

Some of the functions that the module can perform are:

  • /2 /3 Clock divider

  • Legato generator

  • Trigger to gate converter

  • Rhythm quantizer

  • Sub octave generator with PWM

  • Generative trigger sequence 

The Gaeto’s function is to perform the following operation:

“If the signal on the data input has been high, then the output is high at the next clock. If not - the non-output is high.”

In other words, if the signal on the input signal goes over 1V then the memory stores a 1 if not it stores a 0. At the next clock the output will be high if a 1 was stored and the non output will be high if a 0 was stored. 

The output is coupled with an AND gate that allows for the outputs to either follow the pulse width of the clock or be maintained high until the next clock. This function is also CV controllable for interesting rhythm modulations.

This rather obscure function allows for an extremely wide range of uses. This is a module that rewards exploration.

Additionally, multiple Gaetos can be chained together using the included cable to create shift register functions. 

This design relies on CMOS CD4000 series ICs (4013 and 4081). These were selected for their reliability, high speed and low power consumption.

You Might Also Like

AtoVproject - MMx2 DIY MMx2 Perspective Black.jpg MMx2 silver white BG.jpg MMx2 2 modules white BG.jpg MMx2 Perspective Silver.jpg MMx2 black white BG.jpg DSC02654 small.png
AtoVproject - MMx2 DIY
€160.00
AtoVproject - lx-euclid Assembled lx-euclid perpective.JPG 2small.jpg 5small.jpg 4square.jpg 4small.jpg 3small.jpg
AtoVproject - lx-euclid Assembled
€350.00
Random Works - nQuencer DIY kit
Random Works - nQuencer DIY kit
€140.00
AtoVproject - lx-euclid DIY kit 2small.jpg 3small.jpg 4small.jpg 4square.jpg 5small.jpg lx-euclid perpective.JPG
AtoVproject - lx-euclid DIY kit
€250.00
AtoVproject - cDVCA DIY PXL_20220810_075816649~2.jpg 2 Module white BG.jpg cDVCA black white BG.jpg prespective Black.jpg cDVCA Silver white BG.jpg prespective Silver.jpg
AtoVproject - cDVCA DIY
€190.00

Contact us at: info@atovproject.de

Technical support: Support@atovproject.de

Firmware updates: Updates

Berlin - Germany

About

Privacy Policy